Now get the Quasar Q-LED BiColor Lamp with LiOn Battery Power! Simple to use, no cords needed, just turn it on and you have either 3000K Tungsten or 5600K Daylight soft light.
Color Temp: 3000k/5600k
Press and hold the power button to alternate between color modes.
Dimming Levels: 100%, 75%, 50%, 25%, 10% OFF
A single button press cycles through the dimming levels
Rechargeable Lithium Ion Battery
Charges from Mirco USB power adapter - V3.0 -9V @2A / 12V 1.5A
-(Will not charge on standard 5v USB Charger)
Battery Level Indicator
Runs for about 4 hours at full charge
To maximize battery life, the lamp can not operate while charging.
Color Rendering Index:
95 CRI +
25,000 + Hour Lifetime
Press button once to turn on.
Press multiple times to dim.
Press and hold to change from 3000k to 5600k.
To disable the Power Button when traveling, using a pen, press and hold the the KILL button button on the side for 5 seconds.
To enable the Power Button after it has been killed, plug it into your charger.
To Reset the lamp to default settings of 5600k and 100%, press the RST button.
If the Q-Lion LED will charge but will not turn on with a button press, press and hold the kill button for 5 seconds. Then plug back into the QC 3.0 Charger.
|Dimming levels||100%, 75%, 50%, 25%, 10%|
|Power||Rechargeable Lithium Ion Battery 6700 mAh (49,58Wh)|
|Charge||Charges from Mirco USB power adapter - V3.0 -9V @2A / 12V 1.5A|
|Color Rendering Index||95 CRI +|
|Lifetime||25,000 + Hours|